|
Post by brokennock on May 12, 2023 15:34:04 GMT -7
Well, not really. The base I make mine out of is on sale. I find most of the pan brushes I've encountered that are sold for the purpose have bristles that are too soft and flimsy. Stenciling paint brushes with the handles cut shorter, and sometimes I wrap them in leather, work better. I went to buy a new one and couldn't find any single brushes in the small size I like. But,,, Hobby Lobby has 40% off on Master's Touch brushes and I thought I'd try this small angled brush, I cut the handle, lightly sanded it with 1500 grit paper to knock the shine back, then lightly sanded the ferrule with 800 grit to break any surface coating and dull the shine. I then hit it with a little Perma-Blue, left on for 1 minute then wiped off and oiled the metal to stop the bluing agent. It would appear that the base metal has copper, or is plated copper, but I think that adds to the look against the blued metal. Honestly I find a pan brush useless for a fouled pan. But they can be handy for cleaning up the lock and pan when dumping the prime at the end of the hunt when no shots were fired.
|
|
|
Post by spence on May 12, 2023 19:49:06 GMT -7
Honestly I find a pan brush useless for a fouled pan. I agree unless the bristles are pretty stiff. Stiff or soft, "experiential archaeology" has taught me one thing about them...If hunting on a rainy day, keep your pan brush in the dry, don't let it dangle on your strap where it can get wet. If you don't do that you will wind up washing your pan instead of brushing it, and that doesn't work very well. Spence
|
|
|
Post by Black Hand on May 13, 2023 10:11:13 GMT -7
Find a cheap chip brush at Harbor Freight - stiff hog bristles. You could get a dozen or more pan brushes from one 3" brush.
As mentioned above, I find little use for a pan brush. I have one attached to my bag but wipe with the corner of my hunting shirt or use my thumb.
|
|
|
Post by brokennock on May 13, 2023 16:22:25 GMT -7
... but wipe with the corner of my hunting shirt or use my thumb. I often do the same. Monday when I was out I managed to bump my frizzen open just enough to scatter some priming powder onto the metal forward of the pan and frizzen. This being treated often with beeswax and/or mink oil tends to have stuff like powder granules stick and not just wipe away, especially as I wanted to do so without opening the frizzen again. I had no brush with me. I used the tip of a small pheasant feather in my hat band, it worked okay but not great. It didn't help that I broke with my normal routine and used 4f for prime, won't be doing that again.
|
|
|
Post by spence on May 13, 2023 17:03:16 GMT -7
Find a cheap chip brush at Harbor Freight - stiff hog bristles. You could get a dozen or more pan brushes from one 3" brush. I did that. Bought a small, cheap import brush with hog bristles at the local paint store and made a pan brush, that is. I went off the rail, used wire, hide glue, beeswax, rawhide and sinew to make it, and it has served me well for several decades. Spence
|
|